Home / Products / Appliance Glass / Flat Glass / Content

Products

PC Case Tempered Glass

GL is a professional glass OEM focus on PC case tempered glass in gaming box. Our products mainly use high strength 4-5mm tempered glass, which clear, gray tinted or smoked finishes for our customer selection. We can offer custom silkscreen print for logos, patterns or border designs base on customer's specifications. With 9H hardness + IK09, edge grinding and strict flatness control, our glass panels meet commercial grade durability standards for world wide customers.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Gaming box panel favourable choice - PC Case Tempered Glass

what services can GL offer for PC case tempered glass?

GL Glass already focused in field of PC for 10 years, which became the supplier for major PC brands like Corsair, NZXT, HP, Cooler Master etc. We are not just a vendor but a long term manufacturing partner.

What our years' development, we can offer PC case tempered glass below services:

Cutting & grinding & drilling: Any shape / hole patterns for thumb screws, hinge mounts or tool free clips. Tolerance ±0.05mm.

Tempering: Fully tempered meets highest particle & IK test standard and consider flatness together, no warping no weak spots.

Finishes: Clear, gray tint, silkscreen print(low and high temperature ink) anti-fingerprint(AF), anti-reflective(AR) and anti-glare(AG) coatings, polish edge optimized for RGB light diffusion.

What will GL inspect when glass produced?

Flatness

Marble table with plug gauge to test if flatness meet standard

Particle

International standard: 60pcs in a 50x50mm area

GL standard: 120pcs in a 50x50mm area

IK Test

Every batch of glass after tempered, drop ball test will be done and judge if IK test can meet

Dimensions

Every batch we use quadratic element to measure all dimensions, and every piece we use fixture to test assembly.

Surface

Every piece of glass we use visual inspection to meet if any surface defectives like scratch, dot, silkscreen issues.

What's our pC case tempered glass used?

Mid-tower gaming cases

Standard ATX cases with a piece of tempered glass side panel.

Full tower enthusiast cases

Large cases with dual glass paneles(side + front) for high end and custom liquid cooling

Small form factor(SFF) cases

Mini-ITX and compact desktops with a piece of tempered glass side panel.

open frame chassis

Test benches / wall mount cases, the tempered glass serves as a protective cover over exposed components

vertical GPU showcase cases

Cases designed with tempered glass on top or right side to highlight vertically mounted graphics cards.

modular DIY cases

Cases where users can swap between solid metal, acrylic, or tempered glass panels. Glass is sold as a separate accessory.

Working Principles

We provide PC case tempered glass OEM/ODM customization to meet your specific project requirements.

Monitor components without open the case:

Transparent tempered glass strong enough to replace a solid metal side panel, then you can see the CPU cooler, GPU, fans and RGB lighting while the computer on run. It means you can notice dust buildup, loose cables or a failing fan just by looking through the glass without stop working or remove the panel.

Designed to break safely if something fails

If GPU or PSU overheats and cracks the panel, or if case dropped tempered glass shatters into small blunt chunks instead of sharp daggers. The fragments fall away from motherboard and components. You don't end up with glass shards stuck in fans or lodged between circuits. The hardware stays usable. Only the panel needs replacement.

FAQ

Q:Can you do custom sizes and hole positions?

A:Yes. We cut and drill based on your CAD drawing. Hole positions, cutouts for hinges or thumb screws, and edge shaping are all done to your spec. No minimum order headache for small batch OEM.

Q:Do you offer gray tint and smoked glass?

A: Yes. We do clear, gray tinted, and smoked finishes. The color stays consistent from one batch to the next. No greenish look like cheap glass. Tell us the light transmission you want and we match it.

Q:Is silk-screening done in-house or outsourced?

A:In-house. We print logos, borders, or full patterns ourselves by full automatic printing machines. That means faster lead time and better quality control. No third-party messing up your design.

Q:How do you prevent breakage during shipping?

A:Foam interlayer between each panel, edge padding, and strong cartons. Our breakage rate for sea shipments is under 0.5%.

You still check the shipment, but you won't see many surprises.

Logistics & Packaging

Packaging

Multi-layer protective packaging to prevent scratches or breakage.

Shipping

Sea, air, train, special line and express.

Lead Time

7-10 working days depending on order volume.

Samples

Free for stock samples, charge for custom samples.

After-Sales Support

The professional team offers fully technical support from material selection to glass assembly. If there any problem, our after sale team offer prompt response to ensure customer's satisfaction.